生物氧化预处理中进气量实时预测数学模型研究

精准预测生物氧化预处理中的进气量对提高黄金提取率和节能降耗具有重要意义。以气体管流连续性方程和运动方程为控制方程，采用Preissmann隐格式法作为差分方法。同时，根据集合卡尔曼滤波(Ensemble Kalman filter，EnKF)算法原理，构造进气量、压强的状态空间模型。结果表明，基于气体管流控制方程建立的进气量模型预测结果与实际进气量观测值具有较好的一致性；与传统静态预测方法相比，EnKF同化方法引入实时观测值和模型参数的更新，有效提高了进气量的预测精度，其平均绝对误差、平均相对误差和均方根误差有明显的降低。可见，基于气体管流控制方程建立的预测模型结合EnKF同化方法是提高生物氧化槽进气量预测精度的有效手段。     

矿井地面风硐的改造方案比选与施工

为解决通风系统改造后原地面风硐断面偏小、风速超限的问题,通过在原有地面风硐东侧并联一道钢制矩形通风管道的方法,从而增加风硐断面积,降低风硐内的风速和通风阻力,效果明显。     

采用磁流变阻尼器的人体座椅悬架系统模糊ANFIS-PID复合控制技术研究

对座椅悬架用单出杆式磁流变阻尼器进行阻尼特性试验,并借助MATLAB多项式拟合工具箱对改进多项式模型中未知参数进行辨识。分析人体振动特性,建立五自由度人体座椅悬架模型。综合模糊控制器与自适应模糊神经推理系统(Adaptive Neuro-Fuzzy Inference System,ANFIS)整定PID控制器的优点,提出一种模糊ANFIS-PID复合控制策略。采用正弦信号作为外界激励,分别对被动悬架、传统模糊控制、ANFIS-PID控制及模糊ANFIS-PID复合控制人体座椅悬架系统进行仿真分析。结果表明,辨识得出的参数和建立的改进多项式模型均可满足后续仿真要求;采用模糊ANFIS-PID复合控制策略的隔振效果明显优于传统模糊控制及ANFIS-PID控制,能有效改善人体座椅悬架系统的行驶平顺性及驾乘人员乘坐舒适性。     

单相并联型有源电力滤波器主电路参数耦合关系研究

单相并联型有源电力滤波器(SAPF)主电路参数之间存在一定的耦合关系,这对各参数值的合理选择有较大的影响。通过分析现有单/三相SAPF主电路交流侧电感以及直流侧电压、电容值等参数的计算方法,得到了具体的单相SAPF电路参数解析表达式。针对所得表达式各变量之间的耦合关系,在MATLAB中进行建模优化分析,得出一套完整的参数设计方案。保证在特定负载下补偿后谐波含量低于2%的综合优化目标。仿真和实验过程验证了所选参数的正确性。     

Reducing numerical dissipation in smoke simulation

Numerical dissipation acts as artificial viscosity to make smoke viscous. Reducing numerical dissipation is able to recover visual details smeared out by the numerical dissipation. Great efforts have been devoted to suppress the numerical dissipation in smoke simulation in the past few years. In this paper we investigate methods of combating the numerical dissipation. We describe visual consequences of the numerical dissipation and explore sources that introduce the numerical dissipation into course of smoke simulation. Methods are investigated from various aspects including grid variation, high-order advection, sub-grid compensation, invariant conservation, and particle-based improvement, followed by discussion and comparison in terms of visual quality, computational overhead, ease of implementation, adaptivity, and scalability, which leads to their different applicability to various application scenarios.     

福州海峡国际会展中心扩建工程西区钢结构施工方案研究

本文主要介绍了福州海峡会展中心扩建工程西区钢结构的施工方案。首先介绍了本工程的难点和重点;其次,重点讨论了空间桁架的特点、分段设计考虑及吊重计算以及组合式临时支撑的设计;最后介绍了本工程的主要施工步骤。本工程可供相关类似项目参考。     

改良森吉米尔法退火炉中带钢的氧化研究

总结了带钢经过改良森吉米尔退火炉后的4种氧化状态,通过现场实际生产经验的总结和数据积累,分析了带钢产生表面氧化的关键因素,指出了实际操作中应该注意的事项,为以后的设计调试及生产提供了参考。     

Random-valued impulse noise removal using adaptive dual threshold median filter

Noise detection and its removal is very important in the image processing. Detection of noise is very crucial and significant in random valued impulse noise because it does not hamper the image pixels uniformly. This paper presents a novel and unique concept of adaptive dual threshold for the detection of random valued impulse noise along with simple median filter at noise removal stage. Simulation results shows that an efficient noise detection leads to a superior quality of de-noised image as compared to existing adaptive threshold based image de-noising techniques. Proposed threshold computation is based on averaging of pixel values of window which enhances the PSNR of our system as compared to existing median filter based image de-noising methods.     

Event-triggered controller design of nonlinear discrete-time networked control systems in T-S fuzzy model

This article is concerned with event-triggered fuzzy control design for a class of discrete-time nonlinear networked control systems (NCSs) with time-varying communication delays. Firstly, a more general mixed event-triggering scheme (ETS) is proposed. Secondly, considering the effects of the ETS and communication delays, based on the T-S fuzzy model scheme and time delay system approach, the original nonlinear NCSs is reformulated as a new event-triggered networked T-S fuzzy systems with interval time-varying delays. Sufficient conditions for uniform ultimately bound (UUB) stability are established in terms of linear matrix inequalities (LMIs). In particular, the quantitative relation between the boundness of the stability region and the triggering parameters are studied in detail. Thirdly, a relative ETS is also provided, which can be seen as a special case of the above proposed mixed ETS. As a difference from the preceding results, sufficient conditions on the existence of desired fuzzy controller are derived to ensure the asymptotic stability of the closed-loop system with reduced communication frequency between sensors and controllers. Moreover, a co-design algorithm for simultaneously determining the gain matrices of the fuzzy controller and the triggering parameters is developed. Finally, two illustrative examples are presented to demonstrate the advantage of the proposed ETS and the effectiveness of the controller design method.     

Locally one-dimensional-alternating segment explicit–implicit and locally one-dimensional-alternating segment Crank–Nicolson methods for two-dimension parabolic equations

In the paper two new locally one-dimensional alternating segment schemes for solving the 2-D parabolic problems are developed. The parabolic problems can be solved efficiently over decomposed sub-domains. Two schemes are proved to be unconditionally stable and numerical experiments show the validity of the schemes.